How To Use a tortilla press -is again one of the biggest questions for the amateurs. The tortilla is very healthy_recipe. However, making all round in shape with a pin roller can get hard. However, the process is time taking. Moreover, the roller process even makes the whole process messy. Therefore the usage of tortilla press makes the method all convenient. It helps the cook to get every at hand. However, it makes the process all complete in a few seconds.
Pressing Then Baking The Corn Tortillas: How To Use A Tortilla Press
The task you need to do is to prepare the mass of tortillas. After that, take some portion of the mass. You need to take little portions from the whole dough. After that, roll them into the shape of golf balls. One thing you must now, that the small the size, the smaller is the size of the tortillas. Six inches can be the maximum_size of the diameter of the tortilla. You need to press those ball into a tortilla press to make it tortilla.
Let us now get our hands on the manual tortilla press. However, for that, you need to cut about two pieces of durable plastic. You may cut the plastic in any square or circular shape. However, you need to make sure that the plastic which yo cut should come from a clean shopping bag. However, you can even take it from some food storage options.
Parchment paper will also work fine for this purpose. Moreover, you need to place those plastic and paper cuttings on the press. You need to place those on the surface lining of the press. However, you need to place both at the top and the bottom of the press.
After that, get ready for the primary objective, which is the tortilla pressing function.
How To Make It Actually Work
Line the parchment or the plastic cut out on the surface lining. However, you need to make sure to get your hand all moist. This will prevent your hands from getting all sticky. After that, use your palms and hands to make the balls flat. Place it on the thick bottom of the presser, then flatten the ball. Make the ball flatten at around 2-3 inches in measurement.
You need to press the flattened dough at the center of the press. After that, place another plastic cut out over this flattened dough. After that, with firm grip press down the top plate. After that, move the plate of the press from left and right. This way, it will get an even_distribution. After that, lift the top plate in an upward direction. Then turn the dough ta around 180 degrees. After that again, press the top_plate over the flattened dough. And continue moving it in the left and in the right direction.